- Latest in kereta dot info Malaysia :
  • ENGINE RPM NAIK DAN GEARBOX BUNYI MERAUNG MASA TURUN BUKIT – NORMAL ATAU PROBLEM?
  • APPLICATION OF LORRY & SPECIFICATION

    Today we just want to share the possible application of a Lorry or commercial vehicle with some specification. We might missed this interesting info before. The specification of commercial vehicle is totally different with normal cars to fit it’s purpose to carry heavy load. Sample of commercial vehicle here is the Inokom Lorimas which cost at around RM 49,000 in Malaysia.

    APPLICATION OF LORRY & SPECIFICATION 

    Model D4BB 
    Type 4 cylinder, 4 cycle, SOHC In-line, water colled, indirect injection diesel engine 
    Max. Output (ps (kW) / rpm) 79 (58.1) / 4000 
    Max. Torque (kgm (Nm) / rpm) 17 (167) / 2200 
    Compression ratio 22 : 1 
    Bore X Stroke (mm) 91.1 X 100 
    Displacement (cc) 2607 

    Fuel System
    Type Fuel injection pump with all speed governor 
    Fuel tank capacity (L) 70 

    Air Cleaner
    Type Dry paper type with high vertical air intake duct 

    Clutch

    Type  Hydraulic, dry single plate with cushioning springs 

    Transmission

    Type Manual, 5 forward and 1 reverse speed, overdrive on 5th, floor mounted with mechanical remote control 

    Suspension

    Front Laminated semi-elliptical leaf springs, hydraulic double acting telescopic shock absorbers, torsion bar 
    Rear Laminated semi-elliptical leaf springs, hydraulic double acting telescopic shock absorbers 

    Steering System
    Type Hydraulic, power assisted, rack and pinion, tilt, steering column 
    Min. turning circle (m) 5.3 

    APPLICATION OF LORRY & SPECIFICATION

    Brake System

    Service Brake  Type Front ventilated discs and rear drums, hydraulic control, dual circuit, vacuum servo assisted with LSPV 
    Hand Brake Type Wheel parking 
    Wheel Braked 2 

    Running System
    Front Axle  Type Reverse Elliot I-Beam 
    Axle rating (kgs) 2,000 
    Rear Axle Type Banjo, full floating, single reduction, hypoid 
    Axle rating (kgs) 2,360 

    Types & Rims
    Front / Rear / Spare 7.00 X 15 – 10PR / 5.5F X 15 SDC 

    Lubrication System

    Type  Forced feed lubrication system with rotor oil pump, combination type oil filter and drawn cup oil cooler 
    Capacity (L) 5.4 

    Cooling System

    Type Radiator, corrugated fin and tube, water cooled with pressure cap and condense tank. Capacity 8.3L 

    Chassis Frame

    Type Open channel sides and cross members 

    Electrical System
    Battery capacity (V / AH) 12 / 100 
    Alternator (V / A) 12 / 65 

    Starting System

    Type Gear reduction 
    Output (V / kw) 12 / 2.0 

    Vehicle Performance
    Max. gradebility (tan 0%) 0.27 
    Max. geared speed (km / h) 115 

    Weights

    GVW (kgs) 3,600 
    KERB weight (kgs) 1,535 

    Chassis – CAB Dimension (mm)

    W.B  Wheelbase 2,585 
    O.A.L Overall Length 4,760 
    O.A.W Overall Width 1,690 
    O.A.H Overall Height 2,012 
    F.O.H Front Overhang 1,135 
    R.O.H Rear Overhang 1,040 
    T.F Tread Front 1,430 
    T.R Tread Rear 1,370 
    F.W Frame Width 780

    Please follow and like us:

    kdi

    Pecah fiber pecah gelas, sudah baca komenlah se das! Terima kasih! =) Yg benar, Brader K Majalah Kereta Malaysia - kereta info

    Leave a Reply

    Your email address will not be published. Required fields are marked *

    This site uses Akismet to reduce spam. Learn how your comment data is processed.

    error

    Please spread & share :)